Ergoskeleton or exoskeleton: the difference and which to choose
An ergoskeleton is a passive exoskeleton, with no motor and no battery. This guide explains how it differs from a powered exoskeleton, compares weight, range and prices for Laevo, Ottobock, Hapo, Hypershell and Dnsys, and helps you choose for your use.
Ergoskeleton, exoskeleton: two words for the same family?
In French prevention departments, among equipment distributors and in the farming press, one word keeps coming up: ergosquelette, or ergoskeleton. It appears, for example, in an article by Réussir Vigne on the support harnesses used in vineyards. For many buyers the question is simple: is an ergoskeleton an exoskeleton, or something else?
The short answer: an ergoskeleton is a passive exoskeleton, a device worn on the body that relieves the back, shoulders or arms using springs, gas struts, flexible rods or elastic bands, with no motor and no battery. The prefix "ergo" refers to workplace ergonomics. Its counterpart, the powered (active) exoskeleton, carries motors, sensors and a battery.
This guide covers the definition, compares the two families with figures (weight, range, price), names real models for work and for consumers, sums up what studies say about fatigue and musculoskeletal disorders (MSDs), then offers a short decision tree. For an overview of every family, start with our complete exoskeleton guide.
What prevention bodies say
A usage term, not an official category
The word "ergosquelette" does not appear on the pages that INRS devotes to exoskeletons. The institute, France's reference body for occupational health and safety, instead shows two broad families through its illustrations: on one side, devices "with springs to assist the upper limbs" or "elastic back-assist devices of the strength-harness type"; on the other, assistance robots for the back, upper limbs or whole body. The former match what the market now calls an ergoskeleton, the latter powered exoskeletons.
So keep in mind that "ergoskeleton" is a commercial, everyday word, handy for describing an unpowered model, but no prevention text gives it a meaning different from passive exoskeleton. If you want an official framework, look instead at the NF X35-800 standard and the company integration process.
Why it matters at work
According to INRS, MSDs alone account for more than 80% of recognised occupational diseases in France. That explains companies' interest in these devices. But the institute also points out, in its prevention guidelines, that exoskeletons are designed for very specific physical assistance and fit within the general principles of prevention: first remove or reduce the strain at its source (work organisation, handling aids), before equipping the person.
How an ergoskeleton works, and how a powered model differs
The ergoskeleton: storing and returning your own energy
When you bend forward or raise your arms, the ergoskeleton is loaded: its springs, struts or elastics store part of the energy of your movement. They then release it to help you straighten up or hold the posture. Assistance therefore depends on the joint angle: strong in some positions, almost zero in others. It is simple, robust and needs no charging, but the device does not "decide" anything. Our article how does an exoskeleton work explains these mechanisms in detail.
The powered exoskeleton: motors, sensors and battery
A powered exoskeleton measures your movements with sensors and drives motors that add force at the right moment. It can deliver more assistance and adapt to the task, but it is generally heavier, more expensive and dependent on its battery. At work it is mostly found in heavy handling; for consumers it has taken the form of hip-worn walking exoskeletons.
What about textile exosuits?
In between, textile suits or harnesses with elastic bands are also passive: they belong to the ergoskeleton family, in a soft version. We compare these variants in our questions active, passive or textile: what are the differences and exoskeleton or textile exosuit.
Comparison table: ergoskeleton or powered exoskeleton
The table below uses data published by manufacturers or the specialist press. Prices for professional ergoskeletons are often given excluding VAT and on quotation; consumer prices are those shown online when we checked, including promotions. They change quickly: check them before buying.
| Criterion | Ergoskeleton (passive) | Powered exoskeleton |
|---|---|---|
| Energy source | Springs, gas struts, rods, elastics | Electric motors and battery |
| Weight found | From 400 g (Corfor V2 textile harness) to 4.0–4.4 kg (Laevo FLEX) | From 1.6 kg (Dnsys X1, without battery) to about 7.5 kg (German Bionic Apogee) |
| Range | Unlimited, no charging | 15 km to 17.5 km per battery for walking models |
| Prices found | From €125 excl. VAT (Corfor V2) to €1,999.00 excl. VAT (Hapo BACK) | From €699.00 (Hypershell X Go) to €10,000 (Apogee, industrial use) |
| Typical uses | Bent-forward postures, overhead work, light handling | Heavy handling, walking and hiking |
| Maintenance | Adjustments, textile, springs | Battery, electronics, updates |
Table sources: Réussir Vigne (Corfor V2), Exoskeleton Report (Laevo FLEX), the Hapo BACK product page, the Dnsys X1 page, the Hypershell store and Futurezone (Apogee).
Ergoskeletons at work: real models
Laevo FLEX: the back, in bent-forward postures
The Laevo FLEX, designed by Dutch company Laevo, is a passive back exoskeleton with gas struts and no battery. According to the Exoskeleton Report listing, which cites the official manual, it weighs 4.0–4.4 kg and is intended for forward bending, squatting, kneeling and lifting. It is relatively heavy for a passive device, but designed to be worn for long periods in jobs where you stay bent over.
Ottobock Paexo: shoulders and back
Germany's Ottobock, known for its prostheses, offers a range of ergoskeletons called Paexo. The Paexo Shoulder, worn like a backpack, transfers the weight of raised arms to the hips via a cable system; at 1.9 kg, Ottobock presents it as the lightest of its kind. The Paexo Back, aimed at logistics, weighs about 4 kg and relieves the lumbar spine by up to 25 kg during lifting according to the manufacturer's press release, with a fully mechanical mechanism.
Hapo: the French choice, with flexible rods
Made in France by Ergosanté, Hapo devices are ergoskeletons with flexible rods that rest on the thighs and shoulders. The Hapo BACK weighs about 1.1 kg, is listed at €1,999.00 excl. VAT and carries a 2-year warranty on spring breakage and textile defects, according to the manufacturer's page, which stresses that there is no battery to charge. To compare the range, see our complete Hapo guide.
Textile harnesses: the lightest
At the other end of the range, elastic harnesses focus on lightness. In 2022, Réussir Vigne listed Auxivo's Liftsuit at 900 g and €800 incl. VAT, and the Corfor V2 at 400 g and €125 excl. VAT. Their assistance is more modest, but they can be worn under or over clothing and are easier to forget.
Powered exoskeletons: at work and for consumers
At work: heavy handling
On the professional side, the most cited example is the Apogee from Germany's German Bionic, a motorised back exoskeleton. According to Futurezone, it weighs about 7.5 kg itself, relieves the lower back by up to 30 kg during lifting and costs €10,000. In 2022, Réussir Vigne also mentioned Gobio's IP13 motorised belt, weighing about 2 kg, for about €6,500 excl. VAT. These prices show the gap with most ergoskeletons. Our industrial exoskeleton guide by job helps you judge when the extra cost is justified.
For consumers: Hypershell and Dnsys
For walking and hiking, powered hip exoskeletons have made the technology accessible. On Hypershell's European store, the X Go (400 W, one battery, 15 km per battery claimed) was listed at €699.00, the Pro X (800 W, two batteries, 17.5 km per battery) at €899.00 and the Carbon X at €1,299.00. The brand claims 2 kg for the first two and 1.8 kg for the carbon version.
At Dnsys, the X1 has a mechanical weight of 1.6 kg. The manufacturer claims 15 km with the single battery of the X1 Carbon and 30 km in total with the Carbon Pro's two batteries; the page showed $889.00 instead of $1,299.00 when we checked, with no euro price. To decide between the two brands, read our comparison Hypershell vs Dnsys.
Note: there is no real consumer "walking ergoskeleton". To relieve the knees without a motor, people turn instead to spring systems for skiing or support tights, covered in our knee exoskeleton guide.
What studies say about fatigue and MSDs
The reference review of industrial exoskeletons, published by de Looze and colleagues in the journal Ergonomics, identified 40 papers describing 26 industrial exoskeletons: 19 active and 7 passive. All the passive models targeted the lower back, with reductions in back muscle activity of 10–40% during lifting and holding loads. For active models, reductions in muscle activity of up to 80% were reported. The authors note, however, that discomfort, device weight and alignment with the body hold back real-world use.
A more recent review by Kermavnar and colleagues analysed 13 studies of active back exoskeletons and 20 of passive ones. It generally confirms lower back-muscle activity and spinal compression forces, and better endurance during lifting and static bending. But it also notes lower performance in tasks requiring agility, only moderate user satisfaction and side effects such as increased abdominal or leg muscle activity. Above all, most trials were carried out in the laboratory, with healthy young men.
In short: an ergoskeleton does reduce the load on the back or shoulders in the tasks it is designed for, but there is not yet proof that it lowers the number of MSDs on a site. A powered model relieves more, at the cost of weight and price. The specific risks of these devices are covered in our question does an exoskeleton pose risks to its user?
Pros and cons of each family
The ergoskeleton
- Strengths: no battery, robust, lighter in textile versions, more affordable, ready instantly.
- Limits: weaker assistance, dependent on posture, sometimes awkward when you change position often or walk a lot.
The powered exoskeleton
- Strengths: stronger assistance adapted to the movement, adjustable modes, real benefit for uphill walking or heavy loads.
- Limits: price, weight, charging, electronics sensitive to rain or cold, and a device that becomes dead weight when the battery is flat.
Mini decision tree: which one suits you?
- Want to relieve your back or shoulders at a workstation (bent forward, arms raised, light handling)? Start with an ergoskeleton.
- Long periods bent forward: back exoskeleton with rods or struts, such as the Hapo BACK or Laevo FLEX.
- Arms above your head: shoulder model, such as the Paexo Shoulder; see our question on exoskeletons for overhead work.
- Need discretion and mobility: textile harness.
- You often lift heavy loads and the workstation cannot be reorganised? An industrial powered exoskeleton may be justified, after a trial and advice from the occupational health service.
- You want to walk longer or go hiking? That is the territory of the powered hip exoskeleton, such as Hypershell or Dnsys. Our question which model for a first purchase helps you decide.
- Still unsure? Try before you buy: our question on renting and trying lists the options, and our article on exoskeleton prices gives the ranges by family.
Frequently asked questions
Is an ergoskeleton an exoskeleton?
Yes. The word refers to a passive exoskeleton, with no motor and no battery, designed for workplace ergonomics. INRS does not use it on its pages and speaks of spring or elastic devices, as opposed to assistance robots.
What is the difference between an ergoskeleton and a powered exoskeleton?
The ergoskeleton stores and returns the energy of your own movements using springs or elastics. The powered exoskeleton adds force with motors controlled by sensors, and must therefore be charged.
How much does an ergoskeleton cost?
Prices found range from €125 excl. VAT for a simple textile harness to €1,999.00 excl. VAT for the Hapo BACK. Industrial powered exoskeletons are well above that, like the Apogee at €10,000.
Is an ergoskeleton effective against back pain?
Studies show a 10–40% reduction in back muscle activity with passive models, mainly in the laboratory. The long-term effect on the onset of MSDs has not yet been demonstrated. If you already have pain, read our question on exoskeletons with a herniated disc or low back pain.
Is there an ergoskeleton for walking or hiking?
Not really: consumer walking exoskeletons are active and motorised. Without a motor, you mainly find spring systems for skiing and support tights for the knees.
Further reading
To place the ergoskeleton among all the families, read our complete exoskeleton guide, then compare the Hapo BACK for work and the Hypershell X Pro S for walking.